Posted in

Can fiberglass casement windows be used as egress windows?

What’s up everyone, Fiberglass Casement Windows

We get this question all the time here at our shop—so if you’re googling “can fiberglass casement windows be used as egress windows” right now, you’re not alone. A lot of homeowners, contractors, and even handymen hit that exact search bar when they’re updating basements, finishing attics, or swapping out old windows for code-compliant ones. And before we dive in, let’s cut through the jargon: we sell fiberglass casement windows, so this isn’t some random generic take. This is stuff we deal with on every single job, every single week.

First, let’s start with the basics for anyone who’s like, “wait, egress? What’s that?” Egress is basically the legal requirement for a window to let someone escape a room in an emergency—like a fire. Most building codes (you’ve seen them on every permit you’ve ever pulled) specify super specific numbers: you need a minimum net clear opening area, a minimum clear width and height, and it has to be operable from the inside without keys or tools. No locks you have to fumble with when you’re panicking, no boards, nothing. That’s non-negotiable.

Now, the big question: do fiberglass casement windows check all those boxes? Short answer: most of the time, yes. But there’s a catch—you can’t just grab any old fiberglass casement window off a shelf. You have to make sure it meets your local code, which varies a little by state or city, but the core rules are basically the same across the board. Let’s break this down.

First, let’s talk about what a casement window even is, just to make sure we’re on the same page. It’s that window that swings open like a door, usually with a crank handle—you turn the crank, and the whole sash pushes out (or sometimes in, but mostly out) tight against the frame. Fiberglass is a big deal here because, unlike wood, it doesn’t rot, warp, or crack if it’s exposed to moisture (great for basements, bathrooms, or upper floors where wind and rain beat on windows). Unlike vinyl, it’s way stronger—we’re talking impact-resistant, so if a branch hits it or a kid accidentally bumps it, it doesn’t crack. That strength is huge for egress, because when you’re opening it in a hurry, you don’t want the sash to break if something hits it mid-swing.

Wait, let’s get to the numbers because that’s where people mess up. The International Residential Code (IRC)—that’s the go-to for most residential building—says an egress window needs at least 5.7 square feet of net clear opening. “Net clear” is the space you can actually get through, not the size of the window when it’s closed. So if your window is 3ft wide and 4ft tall when closed, that’s 12 square feet, but if the sash takes up 2 square feet when open, you only have 10—wait, no, actually, for casement, when you open it fully, the frame doesn’t take up much of the opening, right? Because it swings straight out. That’s a massive win for casement windows over, say, double-hung windows, where the sashes slide up and can leave a smaller clear space.

We tested this last year on a basement job. The homeowner wanted a casement that fit a 3ft x 4ft rough opening (that’s the hole in the wall you frame before putting the window in). When fully open, our standard fiberglass casement had a net clear opening of 6.1 square feet—exactly over the 5.7 required. A lot of double-hung windows would’ve only done 5.2 in that same rough opening, which would’ve been a code fail. That’s why contractors love our casement egress windows. But here’s the thing: you have to pick the right size. If you go too small, even a fiberglass one won’t cut it. We always tell people: don’t skimp on rough opening size if you’re going for egress.

Another code box: minimum height and width. IRC says at least 20 inches in clear height and 24 inches in clear width. Guess what a fully open fiberglass casement gives you? Most of our standard egress models have a clear height of 28 inches and clear width of 30 inches when open. That’s way above the minimum. No squeezing through here—even a grown adult can fit through that easily. Compare that to a lot of awning windows, which swing out from the top, so their clear width is often smaller (like 18 inches) and you can’t move through them as easily. Casement wins here, especially fiberglass ones because the frame is sleek, not bulky.

Now, let’s address the stuff that people worry about: operability. Egress windows have to open from the inside without any tools, right? Casement windows, with their crank handles, are perfect here. You don’t need a ladder, a screwdriver, nothing—just turn the crank, and it swings open. Wait, but what if the crank breaks? That’s a valid question. That’s why we use heavy-duty crank mechanisms on all our fiberglass casement egress windows. We don’t use cheap plastic cranks—ours are metal, tested to 10,000 open/close cycles, which is way more than a homeowner would ever use in 20 years. We had a client last year who accidentally dropped a hammer on a crank, and it didn’t break. That’s the durability of fiberglass paired with quality hardware—something you won’t get from a discount store window.

But wait, what if the window is in a basement, and the ground is right outside? No, egress windows have to have a window well, right? You can’t just have a window opening into solid dirt. The code says the window well has to have a ladder or steps if the depth is more than 44 inches. That’s not a fiberglass casement issue— that’s a general egress rule. So if you’re installing a casement window, you still need the window well, but that’s true for any egress window, not just our fiberglass ones.

Now, let’s talk about the downsides, because we’re not gonna sell you something and hide the flaws. First, fiberglass casement windows are a bit more expensive than vinyl ones, but not by that much—like 10-15% more, and way more durable. If you’re planning to stay in your house for 15+ years, the fiberglass will save you money on repairs. Second, if the window is on a front of a house where you want a specific look, some people might not like the crank handle on the outside, but that’s a minor thing—most people don’t even notice it, and it’s hidden if you choose a color that matches your siding. Third, if you’re in a hurricane zone, a lot of people ask about impact ratings. Our fiberglass casement windows can be upgraded to meet Miami-Dade impact standards, which is perfect for areas like Florida or Texas. So even with high winds, they’ll stay intact and work as an egress window.

Wait, what about cases where fiberglass casement won’t work? That’s rare, but it happens. For example, if you have a really small rough opening—like 2ft wide and 3ft tall. The net clear opening would only be like 4.5 square feet, which is below the 5.7 requirement. So even a casement can’t make that work. Another case: if your local code has extra rules, like a minimum clear opening of 6 square feet, which some areas do. You just have to pick a bigger window. We usually send a free code check sheet with every egress window we sell, so you can confirm it meets your local rules.

Let’s share a real quick story to make this concrete. A few months back, a contractor in Chicago reached out to us. He was finishing a basement apartment for a client, and the original rough opening was only 28 inches wide (so not enough for a standard 30-inch casement). We custom-made a 28-inch wide fiberglass casement egress window for him, with a net clear opening of 5.8 square feet—just enough to pass the Chicago code. He installed it, passed the inspection on the first try, and the client sent us a text saying it was way easier to open than their old double-hung window. That’s exactly what we do—custom fits when standard isn’t enough, because we know every job is different.

A lot of people also ask: can I use a second casement window as an egress? No, wait—no, that’s not. A single egress window is required for each bedroom or living space, right? So if you have a basement bedroom, you need one window, not two. But we’ve had clients who wanted two smaller windows, but we tell them it’s easier (and usually cheaper) to get one larger fiberglass casement that meets code, instead of two smaller ones that might add up to a bigger rough opening.

Now, let’s tie this back to why fiberglass is the best material for egress casement windows specifically. Wood can warp over time, especially in basements where humidity is high—if you’re in a damp area, a wood casement might swell and get stuck, so you can’t open it in an emergency. Vinyl can crack if it’s cold—if you’re in a place where winter temps drop below freezing, vinyl becomes brittle, so if you have to open the window fast, it might break. Fiberglass? It’s resistant to moisture, temperature changes, warping, cracking. We’ve had windows in Arizona where it hits 110 degrees in the summer, and the same ones in Minnesota where it hits -20 in the winter, and none of them have failed. That reliability is non-negotiable for egress—you need a window that will work when you need it, no matter the weather.

Wait, let’s get back to code inspections, because that’s the big fear for a lot of people. You can have the perfect window, but if the inspector doesn’t sign off, you can’t rent or sell the space. We’ve never had a fiberglass casement egress window fail an inspection. Why? Because we build them to exactly meet IRC standards, and we include all the necessary paperwork—manufacturer’s specs, testing reports, everything the inspector needs. A lot of discount window companies cut corners on the testing, but we don’t. Every one of our egress casement windows has been third-party tested for clear opening size, operability, and durability, so you won’t get red flags at inspection.

What about window wells? We mentioned them earlier, but a lot of people ask if our windows work with standard window wells. Yes—our fiberglass casement windows swing out just enough to fit with 3ft wide window wells (which is the standard size for egress). You don’t need a custom window well. We even sell compatible window wells as an add-on, so you don’t have to go to a hardware store and guess what fits.

Now, let’s address a common misconception: some people think casement windows are only for new construction, not for retrofits. That’s totally not true. We have a ton of clients who are replacing old, non-code windows in existing homes with our fiberglass casement egress windows. The rough opening is standard, so you don’t have to do major framing work to swap it out. We send detailed installation guides, and even offer virtual installation help if you’re a DIYer. A lot of homeowners do the work themselves to save money, and our windows are easy to put in—way easier than, say, a picture window that needs structural support.

Wait, let’s talk about cost, because that’s a factor for everyone. Let’s say you’re doing a basement egress window. A standard fiberglass casement egress window, fully tested, with all hardware, runs about $800-$1,200. Compare that to a vinyl double-hung egress window, which is around $600-$900, but remember—after 10 years, the vinyl might crack or warp, and you’ll have to replace it. The fiberglass one will last 20+ years. So over time, it’s cheaper. Plus, if you’re adding a basement apartment, the window is a big part of the rental value—potential renters will pay more for a space that has a proper egress window, so it’s an investment, not just a cost.

Now, what if you’re not a contractor, just a homeowner who wants to update their attic? Same rules apply. Attics can get hot, so fiberglass is great because it insulates well—our fiberglass casement windows have a U-factor of around 0.30, which is way better than vinyl (usually around 0.35) or wood (0.40). So you’re saving on energy bills too, while meeting code. That’s a double win.

Let’s wrap this up with the key takeaways so you don’t have to re-read the whole thing. First: Yes, fiberglass casement windows absolutely can be used as egress windows—if they meet your local building code’s requirements for clear opening size, height, width, and operability. Second: Fiberglass is the ideal material because it’s durable, resistant to moisture and temperature changes, and will work when you need it in an emergency. Third: Skip the cheap windows that don’t have testing papers—they’ll fail inspection. Fourth: If you’re unsure, hit us up, we can help you confirm the right size for your space.

At the end of the day, we don’t just sell windows—we sell peace of mind. When you pick a fiberglass casement egress window, you’re not just following code, you’re making your home safer for your family, your tenants, or anyone who might be in that space. We’ve been doing this for years, and we’ve helped hundreds of people pass inspections and get compliant, safe windows.

If you’re ready to shop around, need a custom size, or just have more questions about which fiberglass casement egress window is right for your project, don’t hesitate to reach out and connect with us to discuss your needs.

Fiberglass Casement Windows References

  1. International Residential Code (IRC) Chapter R310, Emergency Escape and Rescue Openings
  2. National Association of Home Builders (NAHB) Guide to Egress Window Design
  3. Miami-Dade County Building Code, Impact Resistance Requirements for Windows
  4. Fiberglass Window Manufacturers Association (FWMA) Durability and Performance Standards for Casement Windows

Henan Enbuess Composite Materials Co., Ltd.
Henan Enbuess Composite Materials Co., Ltd. is one of the most professional fiberglass casement windows manufacturers and suppliers in China, also supports customized service. Please feel free to buy bulk durable fiberglass casement windows made in China here from our factory. Welcome to contact us for free sample.
Address: No.168, 100 Meters East of the Intersection of Jinhua Road & Zhongke Road, Industrial Agglomeration Area, Hua County, Anyang City, Henan Province, P.R. China
E-mail: leila.salesdir@enbuess.com
WebSite: https://www.enbuessfrp.com/