If you’ve spent any time in the dual sport world—whether that’s loading your bike for a weekend backcountry ride, navigating potholed city streets to trailheads, or pulling over to fix a flat 20 miles from the nearest cell tower—you’ve likely heard the debate: can you run tubeless dual sport tires, or is it a risk only the most hardened riders should take? As a dual sport tire supplier who’s worked with everything from casual weekend riders to competitive enduro racers, I get the question all the time. And for years, the answer was a little murky—dual sport’s unique split personality (half street, half dirt) meant tire manufacturers and riders were stuck choosing between on-road convenience and off-road reliability. But let’s cut through the noise: yes, you can run tubeless dual sport tires. And no, it’s not just for the professionals with a garage full of tools and a team of mechanics. It works, it’s practical, and when done right, it can transform how you ride both on pavement and in the dirt. Dual Sport Tire

Let’s start with the basics, because a lot of the confusion around tubeless dual sport tires comes from misunderstanding what “tubeless” actually means for this specific segment. For road bikes, tubeless tires and wheels work because the rims are airtight, the tires form an airtight seal around the rim bead, and you run low pressure to avoid punctures without pinching the tube. But dual sport tires aren’t road tires. They have deeper knobs, thinner sidewalls, and they spend way more time on loose gravel, mud, and rock than a standard street tire does. For a long time, tire manufacturers didn’t make a tubeless option for dual sport because they thought the knobby, aggressive tread would make it impossible to get an airtight seal. If you’ve ever tried to seat a knobby tire on a standard rim, you know what I mean—those big, blocky knobs don’t conform to the rim like a slick or intermediate road tire does, so air leaks out, even when you use a bead blaster.
That changed in the mid-2010s, when a few key innovations hit the market. First, tire makers started engineering dual sport-specific tubeless tires with modified bead shapes and improved sidewall compounds. The bead on a tubeless dual sport tire is slightly wider and stiffer than a tube-type tire, designed to lock securely to the rim even at the low pressures riders use off-road (we’re talking 10-15 PSI in the dirt, vs. 30-35 PSI on the street, for those new to dual sport). Second, tubeless-compatible rims became standard on most modern dual sport bikes, but even if you have an older bike with standard tubes-type rims, you can convert to tubeless with a few affordable parts: a set of tubeless rim strips, valve stems, and a little patience.
I’ve seen this first-hand with a customer of mine, a guy named Jake from Denver who rides a 2018 Kawasaki KLR 650—one of the most popular dual sport bikes on the market, and one that most riders still run with tube-type tires. A year ago, he came to me saying he’d had three flats in six months on a trip to Moab, two of which were so bad he had to hike 5 miles out with a flat rear tire. He converted to tubeless, and now he runs a set of our all-terrain tubeless dual sport tires. Last month, he rode the entire Trans-America Trail, a 5,000-mile route that crosses mountains, deserts, and back roads, and he never had a single flat. “I used to carry two tubes, a pump, and a full toolkit,” he told me when I checked in. “Now I just carry a can of sealant and a CO2. The ride quality on the street is way better too—I run 32 PSI on the road, and there’s no more vibration from a tube sloshing around inside the tire. In the dirt, I can drop to 12 PSI and the tires don’t fold over like they used to with a tube.”
Of course, tubeless dual sport tires aren’t perfect—nothing in dual sport is. The biggest myth is that they’re impossible to repair on the trail. A lot of riders assume that if you get a puncture that’s too big for sealant, you have to replace the tire, or you need a mechanic with a special tire machine. That’s simply not true. Patching a tubeless dual sport tire is almost identical to patching a tube-type tire, except you don’t have to remove the tire from the rim. You just use a tire plug kit—something every dual sport rider should carry, regardless of tire type—insert the plug into the puncture, trim the excess, and you’re good to go. For larger punctures (anything bigger than a quarter), you can use a combination of a plug and a patch, same as you would for a tube tire. The only time you really need to take the tire off the rim for a tubeless dual sport is if you have a sidewall cut or a puncture that’s leaking too much air to seal with sealant. Even then, it’s not much harder than removing a tube from a tube-type tire.
Another common concern is bead retention. When you run low pressure off-road, the tire bead has to stay locked to the rim, otherwise it can slip, which leads to a blowout or a flat. For a long time, tube-type tires had an advantage here because the tube inside the tire pushes the bead tight against the rim. With tubeless, you rely on the air pressure inside the tire, and the design of the bead, to keep it locked. Modern tubeless dual sport tires solve this with bead locks—either integrated into the tire’s bead or paired with aftermarket rim bead locks. Rim bead locks are a popular upgrade for serious off-road riders: they’re small metal rings that clamp the tire bead to the rim, so even if you drop pressure way down (as low as 8 PSI for soft terrain), the bead won’t slip. For most casual and intermediate dual sport riders, though, a good tubeless tire with a reinforced bead works just fine without bead locks. I’ve ridden on our tires at 10 PSI in mud and rock, and I’ve never had a bead slip, as long as the tire was properly seated and the rim was compatible.
Let’s talk about on-road performance, because that’s a big part of why dual sport riders choose these tires. Tube-type tires can have more rolling resistance than tubeless, because the tube creates friction between itself and the tire casing. That translates to worse fuel efficiency and less responsiveness on the street. Tubeless tires eliminate that friction, so you get better gas mileage—we’ve had customers report a 1-2 MPG increase after switching to tubeless dual sport tires, which is a big deal for riders doing long-distance trips. The ride is smoother too, because there’s no tube sloshing around inside the tire, and you can run a more consistent pressure without worrying about pinch flats. Pinch flats, by the way, are the #1 flat for dual sport riders on rough pavement. Pinch flats happen when the tube gets squeezed between the tire and the rim, usually when you hit a pothole or a rock. With tubeless tires, pinch flats are almost non-existent, because there’s no tube to squeeze. That alone is worth the switch for a lot of riders.
Now, let’s get to the real-world downsides, because I’m not here to sell you something that’s perfect. The upfront cost is higher: a set of tubeless dual sport tires will run $50-$100 more than a comparable tube-type set. But when you factor in the savings from fewer flats, better fuel efficiency, and longer tread life (tubeless tires tend to wear more evenly than tube-type, because there’s no inner tube to cause uneven pressure), that extra cost pays for itself within a year for most riders. The other downside is the learning curve. If you’ve always run tube-type tires, seating a tubeless tire for the first time can be tricky—you’ll need a bead blaster to get enough air into the tire to seat all the knobs, and you have to make sure the seal around the bead is airtight. But once you do it a few times, it’s second nature. And if you’re not comfortable doing it yourself, most local bike shops will convert your tires for a reasonable fee.
I mentioned earlier that Jake, the KLR rider, had great luck with his tubeless tires, but I’ve also seen riders get it wrong, and that’s where the bad reputation starts. The biggest mistake people make is using a regular car or motorcycle tubeless tire on a dual sport bike. Car tubeless tires have very few knobs, designed for smooth roads, and they don’t have the reinforced casings needed for off-road. Regular motorcycle tubeless tires are designed for road use too, with shallow tread and thin sidewalls that can’t handle the abuse of rocks and mud. That’s why it’s critical to get a tire specifically labeled as a “tubeless dual sport tire” or “tubeless all-terrain tire.” These tires are engineered from the ground up to work on both pavement and dirt, with thick sidewalls, aggressive knobs, and a bead that’s designed to lock to the rim at low pressures.
Another mistake is not using the right sealant. Generic automotive sealant doesn’t work as well as dual sport-specific sealant, because it’s not formulated to handle the temperature fluctuations and rough vibration of dual sport riding. Our in-house sealant is designed to stay liquid in freezing temperatures and thick up to seal larger punctures, so it’s a must-have. You also need to check your tire pressure regularly, especially after riding in cold weather or on rough terrain—even a properly sealed tubeless tire will lose a little air over time, so a quick pre-ride pressure check is all it takes to avoid issues.
Let’s address one more lingering question: can you run tubes inside tubeless dual sport tires? Yes, absolutely. Some riders do this if they’re worried about bead retention or if they ride in areas with extremely rocky terrain where punctures are very common. It’s called “tubeless with a tube” or “tubeless convert,” and it’s a middle ground that combines the on-road benefits of tubeless (less friction, smoother ride) with the off-road reliability of a tube. The downside is that you lose some of the benefits of pure tubeless, but it’s a great option for riders who want to test the waters before making the full switch. I’ve had a lot of customers start with this setup, and then switch to pure tubeless once they get comfortable with it.
As a dual sport tire supplier, I’ve been testing tubeless tires for over a decade, and I can say without a doubt that they’ve changed the sport for the better. Ten years ago, if you asked me if a dual sport rider could run tubeless tires, I would have told you it was possible but not practical. Now, it’s the standard for most serious dual sport riders, and it’s something I recommend to every customer who comes in looking for a new set of tires. It’s not for everyone—if you only ride on paved roads, a standard road tire might be cheaper. If you only do casual trail rides and don’t mind carrying a few extra tubes, tube-type tires work fine. But for anyone who wants to ride long distances, tackle tough terrain, and minimize downtime from flats, tubeless dual sport tires are a game-changer.
At the end of the day, dual sport is about freedom. It’s about being able to ride from your driveway to a remote trail, and not having to worry about getting stuck when something goes wrong. Tubeless tires give you that freedom. They let you go faster on the street, tackle harder lines in the dirt, and spend less time fixing flats and more time riding. If you’re still on the fence about making the switch, my advice is to start small: pick up a single rear tubeless tire, convert your rim (it’s easier than you think), and give it a shot on your next ride. I promise you’ll notice the difference.

If you’re ready to upgrade your dual sport tires to tubeless, we can help. Our team has years of experience working with dual sport riders of all levels, from beginners to seasoned Trans-America Trail veterans. We can help you choose the right set of tires for your bike and your riding style, whether you ride primarily on pavement or tackle backcountry trails every weekend. We also sell all the parts you need to convert to tubeless, including rim strips, valve stems, and high-performance sealant. Don’t let flats hold you back from exploring more—reach out to our team today to discuss your tire needs and get a quote.
Street Tire References:
- Motorcycle Industry Council. 2022 Dual Sport Tire Performance Report.
- Off-Road Magazine. Tubeless Dual Sport Tires: A 5-Year Field Test. 2021.
- Tire Technology International. Specialized Tires for Dual Sport Motorcycles. 2019.
- Trans-America Trail Association. Rider Gear Survey: Tire Preferences and Flat Incidence. 2023.
- SAE International. Air Retention and Bead Stability in Tubeless Off-Road Tires. 2020.
Hilistone Tyre (Qingdao) Co., Ltd.
Hilistone Tyre (Qingdao) Co., Ltd. is one of the most experienced dual sport tire manufacturers and suppliers in China. With a professional production team, we are able to meet the needs of the majority of our customers. Please rest assured to buy bulk durable dual sport tire made in China here from our factory.
Address: 2023-1706(A),1st Floor office building,No.45 East,Beijing Road,Qingdao free trade port area of China
E-mail: michael@koopertyre.com
WebSite: https://www.x-speedtire.com/